IDT Announces the Industry’s Widest Range Poly-Phase Power Metering Products for Smart Grid Applications

SAN JOSE, Calif., April 27, 2011– Integrated Device Technology, Inc. (IDT®; NASDAQ: IDTI), the Analog and Digital Company™ delivering essential mixed-signal semiconductor solutions, today announced a new family of poly-phase power metering ICs that offer the widest dynamic range and lowest temperature coefficient in the industry. These new devices allow smart energy meter manufacturers to increase performance while consolidating functionality and lowering cost. The poly-phase power metering ICs expand on IDT’s award-winning90E2xfamily of single-phase devices.

          The90E32and90E36poly-phase metering ICs feature the industry’s widest dynamic range of 5000:1 (90E32)and 6000:1 (90E36), and the lowest temperature coefficient with proprietary temperature compensation technology, offering superior performance over a wide range of usage patterns and environmental conditions, increasing flexibility for meter manufacturers. The devices are fully compliant with international (IEC, ANSI) and Chinese (GB, DL) standards, and can be used for both three-phase four-wire (3P4W) and three-phase three-wire (3P3W) active and reactive energy meters.

         "These newest power metering products enrich IDT’s award-winning portfolio and address the demands of our customers, who have quickly made our single-phase devices a success," saidSean Fan, vice president and general manager of IDT."Our engineering and applications expertise helps to enable the rapid and economical deployment of smart grid technology across the globe. The wide dynamic range and low temperature coefficient specifications are exactly what smart energy meter manufacturers need for their next generation products."

         "We are pleased to see IDT announcing another innovative power metering IC, in addition to the previously introduced single-phase devices," said Mr. Li Xianhuai, Chief Technical Officer of Wasion Group Limited, a premier energy meter manufacturer in China."IDT enables us to offer differentiated features and performance to our end customers. The unprecedented wide range and high accuracy is critical for poly-phase meter applications and the smart grid infrastructure."

          In addition, the IDT 90E36 features an on-chip Discrete Fourier Transform (DFT) analysis engine with Total Harmonic Distortion (THD) detection, raw analog to digital converter (ADC) data access via a direct memory access (DMA) port and other versatile parameter measurement functions. These features provide added flexibility during the development process and expand the device’s applications to Data Acquisition Terminal (DAT) units and other electrical parameter monitoring instruments.

Pricing and Availability
          The IDT 90E32 and 90E36 are currently sampling to qualified customers and are available in a 48-pin TQFP package. The IDT 90E32 and 90E36 are priced at $2.85 and $4.50 each for volumes of 10,000 units, respectively. For more information, please visitwww.idt.com/go/PowerMeter.

About IDT
Integrated Device Technology, Inc., the Analog and Digital Company™, develops system-level solutions that optimize its customers’ applications. IDT uses its market leadership in timing, serial switching and interfaces, and adds analog and system expertise to provide complete application-optimized, mixed-signal solutions for the communications, computing and consumer segments. Headquartered in San Jose, Calif., IDT has design, manufacturing and sales facilities throughout the world. IDT stock is traded on the NASDAQ Global Select Stock Market® under the symbol“IDTI.”  Additional information about IDT is accessible atwww.IDT.com. Follow IDT onFacebook,LinkedIn,Twitter, andYouTube.

About Wasion
Wasion Group is the leading supplier of advanced energy metering products and solutions, with annual production of 3 million three-phase electricity meters, 10 million single-phase electricity meters, and 1 million data collection terminals. Wasion’s premier products command 20% market share, making Wasion a leading supplier in China. For more information, please visithttp://www.wasion.com/en/.

###

IDT and the IDT logo are trademarks or registered trademarks of Integrated Device Technology, Inc. All other brands, product names and marks are or may be trademarks or registered trademarks used to identify products or services of their respective owners.

Source

IDT to Present on CMOS Oscillators for Crystal Replacement at the 2011 ICFS / EFTF Joint Conference

SAN JOSE, Calif., Apr. 21, 2011— Integrated Device Technology, Inc. (IDT®) ( NASDAQ: IDTI), the Analog and Digital Company™ delivering essential mixed-signal semiconductor solutions, today announced that it will present at the 2011 Joint Conference of theIEEE International Frequency Control Symposium and European Frequency and Time Forum, held in San Francisco, CA on May 1-5.

         Michael S. McCorquodale, Ph.D., general manager of the Silicon Frequency Control group at IDT and Senior Member of the IEEE, will present an invited seminar entitled,"A History of the Development of CMOS Oscillators: The Dark Horse in Frequency Control".  The presentation will open by discussing the investments made over the past decade in non-quartz based frequency reference sources, including MEMS and CMOS oscillators, and then shift its focus exclusively to the history of CMOS oscillator development as it pertains to the replacement of traditional quartz crystal oscillators. Pursued for the last 50 years, only recently have design breakthroughs from companies like IDT produced innovative CMOS-based frequency reference devices that have been gaining significant traction, shipping millions of units per quarter for use in a myriad of applications.
 
         “IEEE’s International Frequency Control Symposium is the ideal setting for IDT to showcase its leadership position in developing and delivering innovative frequency control products. Our CMOS oscillator portfolio demonstrates that IDT is a leader of cutting edge timing solutions. The IDT 3CP0C02product, with its 100ppm accuracy, is a major breakthrough in the frequency control market and achieves performance-levels in CMOS thought to be attainable only with quartz technology,” saidFred Zust, vice president and general manager of the Communications Division at IDT.“With power, form-factor, lead-time and cost advantages, CMOS oscillators are now poised to take over a substantial portion of the market previously occupied by quartz-based oscillators.”

            To attend IDT’s presentation, visit the Frequency Synthesis& CMOS Oscillators Session on Tuesday, May 3 at 1:30pm PT at the Hyatt Regency in San Francisco, CA.  As a follow-up presentation, IDT will present Self-Referenced Monolithic RF CMOS Oscillators for XTAL and XO Replacement at the2011 CMOS Emerging Technologies Meetingon June 15-17.  For more information about IDT’s CrystalFree™ CMOS oscillator products, visitwww.idt.com/go/CrystalFree.

About IDT
          Integrated Device Technology, Inc., the Analog and Digital Company™, develops system-level solutions that optimize its customers’ applications. IDT uses its market leadership in timing, serial switching and interfaces, and adds analog and system expertise to provide complete application-optimized, mixed-signal solutions for the communications, computing and consumer segments. Headquartered in San Jose, Calif., IDT has design, manufacturing and sales facilities throughout the world. IDT stock is traded on the NASDAQ Global Select Stock Market® under the symbol“IDTI.”  Additional information about IDT is accessible atwww.IDT.com. Follow IDT onFacebook,LinkedIn,Twitter, andYouTube.

         ###

IDT and the IDT logo are trademarks or registered trademarks of Integrated Device Technology, Inc. All other brands, product names and marks are or may be trademarks or registered trademarks used to identify products or services of their respective owners.

Source

IDT To Release Fourth Quarter and Fiscal Year End 2011 Financial Results on May 9, 2011

SAN JOSE, Calif., Apr. 14, 2011— Integrated Device Technology, Inc. (IDT®) ( NASDAQ: IDTI), the Analog and Digital Company™ delivering essential mixed-signal semiconductor solutions, will issue fourth quarter and fiscal year end 2011 financial results on May 9, 2011 after 1:00 p.m. Pacific time.
    
          The financial results webcast will begin at 1:30 p.m. Pacific time and will be accessible via the IDT website atwww.IDT.com. The webcast replay will be available after 5 p.m. Pacific time on May 9. 

          The financial results conference call number is (800) 230-1059 (United States); (612) 234-9959 (International). The conference call replay will be available after 5 p.m. Pacific time on May 9 through 11:59 p.m. Pacific time on May 16 at (800) 475-6701 (United States); (320) 365-3844 (International).   The access code is 198224.

About IDT
Integrated Device Technology, Inc., the Analog and Digital Company™, develops system-level solutions that optimize its customers’ applications. IDT uses its market leadership in timing, serial switching and interfaces, and adds analog and system expertise to provide complete application-optimized, mixed-signal solutions for the communications, computing and consumer segments. Headquartered in San Jose, Calif., IDT has design, manufacturing and sales facilities throughout the world. IDT stock is traded on the NASDAQ Global Select Stock Market® under the symbol“IDTI.”  Additional information about IDT is accessible atwww.IDT.com. Follow IDT onFacebook,LinkedIn,Twitter, andYouTube.

###

IDT and the IDT logo are trademarks or registered trademarks of Integrated Device Technology, Inc. All other brands, product names and marks are or may be trademarks or registered trademarks used to identify products or services of their respective owners.

Source